Industries
You are here: Home » Industries
Chiller for Optical Coating Process

Chiller for Optical Coating Process

Chiller is a common temperature control equipment in the process of optical coating processing. Many precise optical components are coated to improve the transmission or reflection to certain wavelengths or polarization states. Deposition rate, substrate temperature, oxygen partial pressure, thickness calibration and other parameters have important effects on the processing process of optical coating. Optical coating chiller can eliminate the effect of temperature, resulting in high quality optical coating products.

Chiller for Plastic Industry

Chillers are widely used in plastic injection molding process to remove excessive heat in plastic processing, which will greatly shorten the time of injection molding and improve the production capacity.
Chiller for Plastic Industry
Chiller for Plastic Industry
Screw Chiller for Renewable Energy Battery Industry

Screw Chiller for Renewable Energy Battery Industry

The test of new energy EV batteries includes battery voltage, current, temperature and bms related signals. The battery pack test system of electric vehicle battery chiller provides a test temperature control scheme for new energy batteries. In the test process, all kinds of real-time system parameters can be obtained directly for system performance analysis and optimization.

Chillers for Pharmaceutical

Pharmaceutical chillers are designed to provide precise temperature control for pharmaceutical technology, proving best cooling solution. Stainless steel frames and condensers coils with insulated coating are commonly used in Pharmaceutical Chillers to deal with aggressive chemicals, preventing the unit from any leakage or damage.
Chillers for Pharmaceutical
Mold Temperature Machine for Chemical Reactor

Mold Temperature Machine for Chemical Reactor

A temperature control unit (TCU), also called temperature control machine is connected to Reaction kettle jacket to transfer heat into the chemical elements. The heating temperature has to be precisely controlled.

Mold Temperature Controller for Plastic Extrusion

Mold temperature machines are commonly used in the plastic industry, the main role is:
1. Improve the molding efficiency of products;
2. Reduce the generation of defective products;
3. Improve the appearance of products and restrain product defects;
4. Speed up the production schedule, reduce energy consumption and save energy.
Mold Temperature Controller for Plastic Extrusion
Mold Temperature Controller for Plastic Film Blowing

Mold Temperature Controller for Plastic Film Blowing

A hopper fed single screw extruder was applied for film blowing, polymer feedstock enters the extruder throat to be heated and homogenized to create a molten material. A variety of thicknesses can be produced by combined control of the extruder throughput, inflation, and roller speed.

Mold Temperature Controller for Plastic Sheet Extrusion

While choosing a chiller for your application in plastic sheet extrusion, the overall cooling capacity, the products to be processed, the mechanical capability, and the rolls’ internal design should be taken into account Considering just the cooling capacity, the top roll is there to set the sheet thickness as well as its uniformity. Typically, less than 10% of the roll is in contact with the plastic, minimizing the area for heat transfer. The middle roll does most of the cooling because it has about half its circumference covered with the polymer and the plastic is hottest there, maximizing the heat transfer to the cooled roll. The third roll also has 50% or more of its circumference in contact with the plastic.
Mold Temperature Controller for Plastic Sheet Extrusion
Mold Temperature Controller for Plastic Sheet Extrusion
Mold Temperature for Plastic Industry

Mold Temperature for Plastic Industry

Mold temperature selection: the mold temperature control is very critical for (1) resin curing management, (2) resin gel time control, (3) resin viscosity control, (4) material selection of vacuum bag, sealing tapes, flow distribution medium layer, flow distribution tubes, resin flow inlet and outlet tubes, peel ply, mold release agent and the construction material of the mold itself.

Dynamic Temperature Control System-Battery Testing

The test of new energy EV batteries includes battery voltage, current, temperature and bms related signals. The battery pack test system of electric vehicle battery chiller provides a test temperature control scheme for new energy batteries. In the test process, all kinds of real-time system parameters can be obtained directly for system performance analysis and optimization.
Dynamic Temperature Control System-Battery Testing
Dynamic Temperature Control System-Battery Testing
Dynamic Temperature Control System-Battery Testing
Dynamic Temperature Control System-Battery Testing
Dynamic Temperature Control System-Battery Testing
Dynamic Temperature Control System-Battery Testing
Dynamic Temperature Control System-Battery Testing
Dynamic Temperature Control System-Battery Testing
Dynamic Temperature Control System-Battery Testing
Thermostatic Bath for Viscometer
Thermostatic Bath for Viscometer
Thermostatic Bath for Viscometer
Thermostatic Bath for Viscometer
Low Temperature Thermostatic Bath
Low Temperature Thermostatic Bath
Low Temperature Thermostatic Bath
Thermostatic Bath for Viscometer
For capillary viscometers or densitometers, thermostatic bath are applied for the measurement applications. The highest temperature stability for optimal temperature distribution in the thermostat bath is provided.
Low Temperature Thermostatic Bath
Low Temperature Thermostatic Bath is widely used in the fields of biological engineering, medicine, food chemical industry, chemical analysis, etc. A constant high precise controlled temperature homogeneous place can be provided for users. The temperature is controlled by microprocessor with PID regulator.
The company has passed related quality certifications, ISO9001,CE,Special equipment production license and various invention patents.

Quick Links

Product Category

Contact Us

   +86-18862802935
       +86-18806299578
   Building 7, Haonan Junyi,  Nantong City, Jiangsu Province, China.

Copyright © 2023 Nantong WUDIN Technology Co., Ltd. Technology by Leadong. Sitemap.